Pile configurator user guide
version 1.0 Jan 31, 2025
Introduction
Pile Configurator is an extension of the Terrain Pro workflow. Terrain Pro automates the analyses of
civil works, pier reveal, and tracker type - giving your engineering team unprecedented capabilities to
quantify earthwork requirements for constructing your solar power plants in minutes. As a result, the
output from Terrain Pro is a list of piles with the following information:
• Pile ID
• Rack ID
• Coordinates (easting, northing)
• Elevations (existing grade, proposed grade, and top of pile)
• Reveal (length of pile above grade)
• Attributes (pile name and rack name)
Using the pile name attribute, Pile Configurator allows the user to segregate and group piles into
types, assign minimum embedment length, assign cross sections, and quickly quantify the total
amount of steel for the project
Step-by-step instructions
Logging into Pile configurator
Pro Tools Space: https://platform.terabase.energy/tools
Use your Use your PlantPredict credentials and then click on the “Pile configurator” tile from your Pro Tools Space to access the tool .
Pile configurator landing page
Download the pile data from Terrain Pro - Terrain Pro user guide
Import the csv file into Pile configurator
Pile Configuration overview
Upload an input file – name of uploaded file near the button
Unit– Select the units of the imported data
3D Pile viewer - Visualize the piles with their symbols placed at the Top of Pile elevation
Pile binning table
Minimum 1 bin/group per pile type
Add bins by splitting groups
Assign a Category to each bin/group
Assign a Label to each bin/group
Assign minimum embedment
Assign pile cross section
Quantities are calculated from input file
Total weight (of steel) is automatically calculated
Pile type summary – grouped by “pile name” attribute
Pile distribution charts – distribution and histogram
Order summary report – sums of steel order by section type, name and length
Download output file – Excel file with three worksheets: Pile binning table, Order Report and Enhanced pile data.
Pile binning table
Update color for each grouping/bin
Input configuration for each grouping/bin
Input label for each grouping/bin
Input min. embedment for each grouping/bin
Assign steel cross section for each grouping/bin
Tabulated values
Quantity – tabulated from CSV input file.
Reveal range – minimum to maximum tabulated from the CSV input file:
minimum reveal + reveal window.
Pile length – maximum reveal from reveal range + min. embedment .
Total weight – Pile length x quantity x linear weight from pile section.
Totals and Trend – total quantity of piles and weight, with the weight trend updated whenever parameters change.
Last 5 weight changes – hovering over the trend arrow will open a popup showing the last five weight changes
Splitting a group (adding a pile bin)
Click on the “+” button to split a group (add a pile bin).
Input a reveal within the reveal range to define the point of division within the current range.
Click on the “Split” button to implement, or
“Cancel” if you change your mind.
Input Category for each grouping/bin.
Input Label for each grouping/bin.
Input min. embedment for each grouping/bin.
Assign section for each grouping/bin.
Quantities are automatically updated.
Total weights are automatically updated.
Pile type cards are added to the pile summary grid.
Pile distribution histogram is automatically updated with new grouping/bin
Pile summary cards and histogram
Pile Type Card contains the following elements:
Icon and pile type name
Label and category
Quantity (percentage)
Selecting/deselecting a pile card toggles the visualization of its corresponding distribution on the histogram.
Select All / Deselect All - allows users to either visualize all pile distributions in the histogram or clear the chart.
Range Interval - adjustable to modify the histogram’s distribution.
Minimum values:
Feet: 0.125
Meters: 0.05
Download Excel report
The exported Excel file contains three worksheets:
Pile Binning Table – Includes the source file name, the date the configuration was exported, and the pile type bins configured by the user.
Order Report – Lists piles grouped by section type, length, and category.
Enhanced Pile Data – Contains the source pile data with additional details, including category, label, section type, length, embedment, unit, and weight.